CUCAT Wiki | Main / Ite363

Back to the ITE nongraphical labs index

To complete this lab, you may copy and paste the questions to an editable file to answer them, or Download the lab in .doc format.

Please submit this lab to ite-instructors@ciscovision.org upon completion.

3.6.3 Lab: Install Adapter Cards

Introduction

In this lab, you will install a NIC, a wireless NIC, and a video adapter card.

Accessibility Note: Use the same lab recording you used in lab 2.3.4 for module three labs up until 3.9.2. As with 2.3.4 you are welcome to use your own hardware for these labs.

Recommended Equipment

Computer with power supply, motherboard, and drives installed
NIC
Wireless NIC
Video Adapter Card
Adapter card screws
Antistatic wrist strap and antistatic mat
Tool kit
Motherboard manual

Step 1

What type of expansion slot is compatible with the NIC?

Locate a compatible expansion slot for the NIC on the motherboard.

Remove the slot cover from the back of the case, if necessary.

Align the NIC to the expansion slot.

Press down gently on the NIC until the card is fully seated.

Secure the NIC by attaching the PC mounting bracket to the case with a screw.

Step 2

What type of expansion slot is compatible with the wireless NIC?

Locate a compatible expansion slot for the wireless NIC on the motherboard.

Remove the slot cover from the back of the case, if necessary.

Align the wireless NIC to the expansion slot.

Press down gently on the wireless NIC until the card is fully seated.

Secure the wireless NIC by attaching the PC mounting bracket to the case with a screw.

Step 3

What type of expansion slot is compatible with the video adapter card?

Locate a compatible expansion slot for the video adapter card on the motherboard.

Remove the slot cover from the back of the case, if necessary.

Align the video adapter card to the expansion slot.

Press down gently on the video adapter card until the card is fully seated.

Secure the video adapter card by attaching the PC mounting bracket to the case with a screw.

This lab is complete. Please have the instructor verify your work.